Blog | Almas Preform

October 5, 2026 6 min read

How to Choose the Right Mold in the Bottle Industry

Your mold decides bottle quality, output speed and final cost. This guide walks through the key criteria.

September 18, 2026 5 min read

A short look at the four main production stages and the quality checks behind each one.

August 30, 2026 4 min read

The 1881 neck is shorter and lighter — but is it right for your line?

July 21, 2026 3 min read

Temperature, light and storage time directly affect blow-moulding quality.

June 10, 2026 4 min read

Residual moisture is the main cause of haze and brittle preforms.

May 2, 2026 5 min read

PET is one of the most recyclable plastics. Where does rPET fit in the future of packaging?